Dixon Black Bear ZTR 34 Betreibershandbuch PDF herunterladen (Seite 44)

CARE AND MAINTENANCE

MOWER DECK LEVELING PROCEDURE:

There are a total of (4) slots which will control the attitude

or pitch of the mower deck. Deck should be level or pitched

slightly higher in rear.

A. Place the mower on a smooth level surface with front

casters positioned t owards deck. Check tire pressures

to insure the mower has a correct stance. Inflate tires as

required:

Front 16 - 21 lbs maximum

Rear: 8-14 lbs maximum

NOTE: To insure accuracy of leveling procedure, mower

deck drive belt must be installed prior to leveling

deck.

B. Wear heavy gloves. Turn each outer blade tip to

align with the deck or in a side-to-side manner.

C. Measure from the floor surface up to the bottom of the

blade tip on the discharge side of the mower deck.

Retain this measurement. Move to the opposite side,

check that measurement is the same. If adjustment is

required, loosen the locknut and move mounting bolt up

or down in slot until both side-to-side measurements

are equal. Retain measurement.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 50 51 52

Keine Kommentare

Dixon Black Bear ZTR 34 Betreibershandbuch Seite 44