Dixon ZTR 5502 Spezifikationen PDF herunterladen (Seite 23)

Page 20

CARE AND MAINTENANCE - MODEL 502

LUBRICATION:

CHASSIS AND MOWER DECK: Number of grease zerks used (2)

LOCATIONS: (1) each front wheel caster

SERVICE INTERVALS: Every (50) hours of operation

RECOMMENDED GREASE: Name brand wheel bearing or multi-purpose grease

CAUTION: The use of compressed air pressure greasing methods

is not recommended as damage to seals and bearings could occur.

Using a hand pressure grease gun, lubricate each front caster to allow even

distribution of grease within the caster, rotate or spin each front wheel caster

after (3) pumps of the grease gun. Repeat process until the appearance of grease is

noted completely around each caster.

DRIVE CHAINS: Primary and final drive

RECOMMENDED LUBRICANT: Name brand aerosol chain spray

SERVICE INTERVALS: As required for operating conditions

Remove excess dirt from chains, lubricate each chain completely by applying the lube to

the inside of each connecting link. Applying lube directly to the top of the chain

will only allow the lube to be thrown off in operation. The chains are of special

construction which use o-rings to seal a factory lubricant inside of the chain.

Additional lubrication will cushion chain to sprocket engagement. Avoid the use of

any lubricants which may damage the o-rings used on this chain.

ENGINE OIL CHANGES: "Refer to separate owners manual furnished by the OIL

RECOMMENDATIONS: engine manufacturer."

SERVICE INTERVALS:

Please dispose of used oils at proper collection centers. Protect your environment.

' • "*• - '", • " .

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 36

Keine Kommentare

Dixon ZTR 5502 Spezifikationen Seite 23